Zkteco Biometric Access Control, Time and Attendance Systems Setup and Installation

If you intend to set up and install Zkteco’s biometric access control, time and attendance systems, look no further than DataWorld. Our stores are stocked with a wide range of genuine products from Zkteco Company and our dedicated team of professionals offer unmatched after-sale services that cover set up, installation and routine maintenance at affordable rates. In our store, there is:

Zkteco G4 Pro

G4 Pro is furnished with an upgraded version of the Android 9.0 system. The new version integrates features like as PoE power supply, palm recognition, and it is 4G network compatibility in response to modern market demands.  DataWord’s G4Pro is equipped with ZKTeco’s improved technology of visible light facial recognition. Further, G4Pro has installed a new mini QR code reader to scan mobile application T&A dynamic QR codes on the ZKBio security. The reader supports Data Matrix, MicroPDF417, QR code, PDF417, and Aztec scanning in third-party development projects. ZKTeco additionally provides an LCDP tool which is utilized for integration of 3rd party applications. To ease development and improve efficiency, the time attendance G4 Pro has a basic bottom hardware interface, upper business logic and configuration, and algorithm interface.

Zkteco G4 [QR]

G4[QR] is a multi-biometric terminal of identification that features ZKTeco’s innovative technology of Enhanced Visible Light Facial Recognition and QR Code Scanning. With the latest technology, DataWorld’s G4 (QR) device can automatically perform recognition within a range of 0.5m to 3m immediately a face is detected. Compared to other terminals using near-infrared facial recognition technology, G4(QR) delivers higher recognition quality in both accuracy and speed. This recognition terminal enjoys great advantages over other terminals due to the applied Deep Learning algorithm, pose angle tolerance and anti-spoofing performance that have been greatly improved to endure different types of spoofing attacks and adverse environmental conditions.

Zkteco G4 multi-biometric identification terminal

G4 is a multi-biometric identification terminal featuring ZKTeco’s top enhanced visible light facial recognition and silk ID fingerprint sensor technology. Equipped with the latest technologies G4 can perform face recognition within a range of 0.5m to 3m with automatic function once a face is detected delivering higher recognition quality based on speed and accuracy compared to IR facial recognition. The Deep Learning algorithm has enhanced pose angle tolerance and anti-spoof function to counter dynamic environmental conditions and different spoofing attacks. Further, the 3D Neuron Fingerprint Algorithm accurately authenticates dry, wet, or rough fingerprints with precision.

G4L Enhanced Visible Light Facial Recognition

Enhanced Visible Light Facial Recognition is the latest ZKTeco’s technology, designed to overcome inadequacies of previous facial recognition devices and attain an all-rounded upgrade in terms of performance and reliability. As yet another multi-biometric identification terminal, G4L remarkably offers technologies of improved SilkID fingerprint authentication and Visible Light facial recognition. In comparison to other near-infrared facial identification devices, G4L enables quicker automatic face detection and facial recognition when a target enters its detection zone of 0.5m to 2.5m because it is equipped with cutting-edge Visible Light Facial Recognition technology,

Zkteco Access Control

Zk KF1000 Series

The KF1000 series describes a state-of-the-art ZKTeco visible light facial recognition reader devoted to InBio series biometric controller to adopt the technology of facial recognition. It offers one of the quickest, stable, and most accurate facial recognition in the security industry.

Zkteco SpeedFace-V3L Series

The SpeedFace-V3L series device refer to a visible light face access control stand-alone terminal. SpeedFace-V3L performs facial recognition and fingerprint and when upgraded to SpeedFace-V3L [QR] and SpeedFace-V3L [RFID] the QR and RFID code module support RFID verification. 

ZKBio Pack

The Schneider-Electric’s Continuum / Access It! and ZKTeco biometrics access control system effortlessly enhances the security of building. The ZKBio Pack is simple to use because it launches from Continuum / Access It! Further, ZKBio Pack is flexible and can supports different forms ZKTeco readers. It is also scalable to a limitless number of readers supported. With its simple Installation and fast setup, the ZKBio Pack saves on time. It further comes with the convenience of affordability coupled with enhanced security to buildings through facial identification. Access to buildings is restricted to authorized people only. Unlike badges that are likely to be misappropriated or faked, ZKBio Pack overcomes these limitations, and eliminates the likelihood of accidental lockouts due to forgotten PIN codes or misplaced badges. – Say good-bye to accidental lockouts due to ID cards & PIN codes being forgotten or misplaced.

ZKBio Go

ZKBio Go is a creative APP for IOS and Android platforms that allows a person to add, search of access control and open doors remotely on your smartphone. The dedicated team of experts at DataWorld helps customers get acquainted oh how to use the mobile platforms to ensure all their security needs are met under one roof that is our store.

ZKAccess3.5

ZKAccess3.5 is a professional access control software designed to manage all standalone access control terminals and access control panels of ZKTeco. The software can generate attendance report and manage access control simultaneously. The desktop software is best suited for application in small and medium businesses. The latest humanized structure and flat GUI design of the new ZKAccess3.5 make daily management more convenient and pleasant.

BR1200

BR1200 is ZKTeco’s revolutionary standalone terminal with biometric authentications, QR code reader, and RFID that it is largely utilized as an embedded module into barriers. BR1200 sold at DataWorld supports multiple code formats that include Data Matrix, PDF417, Micro QR, QR code Model 1/2, and GS1-DataBar. BR1200s is mostly utilized as a slave device for other access control devices or BR1200 through RS232 connection, while enabling biometric authentications, QR code, and RFID authentications.

FR1300

FR1300 describes an indoor slave reader featuring an RS485 interface that operate with master controllers from ZKTeco like InBIO series biometric control panels. As an improved slave reader, FR1300 provides the most secure and affordable access control solution for medium sized and small businesses.

Zkteco FR1200 Slave Reader

FR1200 describes a fingerprint reader featuring an RS485 communication interface. It works with fingerprint standalone access control and biometric access controllers like F8 and InBIO series controllers. It provides the function of capturing and transferring samples of fingerprint to access control panel. With its IP65 rated rugged structure, Zkteco FR1200 is more durable and endures all weather conditions in outdoor environments.

FR1500S

FR1500S Features RS485 communication interface, single gang standard junction box installation, silk ID fingerprint sensor, and stainless-steel front casing. It is superbly protected from dust and water splashes from all directions when it comes to installation, the flush design facilitates neat mounting that is smart for executive offices.

RS485 Reader Series

RS485 is communication interface that is commonly used in control applications and data acquisition where many nodes communicate with each other. Known for its versatility, RS485 is a communication standard defined by the EIA. In cases that require use of multiple readers, RS485 communication demonstrates its importance. It further minimizes control panel cost without compromising the accuracy of the control. RS485 Reader Series allow users to connect multiple readers to the control panel in one RS485 port that enlarges the capacity of control panel card reader. Additionally, RS485 offers exceptional rate of transfer that permits long-distance transfer of around 1200m, making it ideal for use scalable areas demanding multiple access points.

KR702E/M

KR702E/M reader has a complete touch key waterproof reader, which is IP65 waterproof and best suited for outdoor use. The reader is a classic illustration of how diverse ZK reader product are. The design of KR702E/M is inclined towards executive and high-end places where elegancy and is emphasized

MR1010 / MR1020

Both MR1010 and MR1020 are innovative access control readers featuring 125 kHz technology for the former & 13.56MHz RFID technology for the latter. These technologies make them ideal for high-security applications. Though attractively designed both MR1010 and MR1020 can endure harsh outdoor environments, a feature that is reinforced by their advanced vandal proof resistance (IK10).

QR50

The QR code Reader describes the latest intelligent access control card readers. Specifically, QR50 has a high recognition rate, top scanning speed and universal compatibility with other applications. It can be connected to all access controllers that supports Wiegand input. QR50 reader easily adapts to numerous application scenarios with the ability to identify almost all types of RFID cards and QR codes. For this reason, QR50 finds application in unmanned supermarkets, community, visitor, and hotel management.

QR600 Series

With ZKBioSecurity Mobile Application, QR600 Series of QR code and RFID card readers is covered with a metal casing that is waterproof, The QR reader supports Dynamic QR code recognition. The metal casing enhances the durability of the reader even when exposed to harsh outdoor environmental conditions. The build quality and elegant design make QR600 Series of QR code and RFID card equally suitable for installation in high end-office settings.

EC10 & EX16

EC10 & EX16 are specifically designed for elevator control. The EX16 floor extension boards and EC10 panel offer customers the most secured, scalable, affordable, and versatile access control solutions available in the market today. Based on different user credentials, floor access can be restricted using fingerprint, proximity card, and password. Additionally, pre-defined time schedules can be used to manage floor access. Controlled access can be lifted during normal visits/business hours. The EC10 Elevator Control Panel can limit access in ten floors. The EX16 Elevator Floor Extension Board limits access in sixteen floors. Every EC10 can support up to three EX16 boards. In total, 58 floors can be controlled with one EC10 bundle. Notably, EC10 panels can be daisy-chained together to manage any desired number of floors. DataWorld’s powerful and user-friendly software makes the Elevator Control System seamless to manage. Software companies can to integrate with the system using an SDK

InBio160 POE Bundle

InBio160 conducts the matching of fingerprints on panels. The FR Series of readers convey fingerprint templates to InBio160 via RS-485 for accurate and fast comparison and matching with templates stocked in a data-base. The POE splitter has the ability to offer12V 2A DC for InBio160 and one 12V DC lock. The splitter is connected to a POE switch on the input side.

C2-260

C2-260 is two doors mini control panel that is IP-based. It supports TCP/IP communication via RS485 communication and LAN or WAN network that permits extension to RS485 devices such as WR485, DM10, and AUX485. C2-260 is a flawless match for the web-based software ZKBio Access to offer RFID Security solution. It can control two doors by default setting and this number can be extended to 10 doors if need be.

LockerPad-7B

LockerPad-7B is an essential part of the ZKTeco Smart Locker Solution. It could control up to 96 locks via the lock control boards. Its firmware can be customized need to control more doors arise. LockerPad-7B is the first ZKTeco’s biometric device for lockers. The self-service technology through facial recognition and face registration could be applied in supermarkets, museums, gyms, swimming pools, and libraries. LockerPad-7B require no staff to control thus saves on labor costs.

SpeedFace -H5

SpeedFace -H5 describes a 3-in-1 Starter Facial Recognition Terminal that has a 5-inch Touch Display Featuring Enhanced Visible Light Facial Recognition with in-built Computer Vision, verification with Fingerprint, RFID and Facial Recognition, and an LCD with 5-inch display.  Additionally, SpeedFace -H5 features a Dual-camera that enable face detection in real-time and its template has a capacity for 6’000 faces that can be recognized within a range of between 0.3 – 3 m imperatively, SpeedFace -H5 is compatible with external Wiegand reader, RS232, RS485, and Wi-Fi communication

FaceDepot-7B

FaceDepot-7B is yet another ZKTeco’s indoor facial recognition station featuring an exquisite and slim and design with 7-inch display. Additional features of the recognition station include improved visible light facial recognition with in-built deep learning, and the templates capacity is 10,000 faces. There is also an optional fingerprint and ID / IC module, real-time face detection dual-camera, Recognition range of between 0.3 – 3 m, ZKTeco boosted high performance processor. FaceDepot-7B is Compatible with Wiegand reader, external RS232, RS485, and Wi-Fi and USB communication · as well as ZKTeco and 3rd party barrier · IP65 entrance protection rating for FaceDepot-7BL.

PA10

PA10 is an access control and time attendance terminal with Fingerprint and Palm Hybrid Biometrics. The Palm verification features both palm print and palm vein giving it an impeccable antispoof because it is touch-less. Regardless of whether the fingers are dry, wet, or rough, the BioID sensor provides exceptionally high identification rate. Additionally, the optional TCP/IP, RS485, PoE and Wi-fi are available which permit PA10 to be used in different networks and situations.

FV350

FV350 is a multi-biometric reader that is capable of capturing and processing fingerprint and finger vein biometric data simultaneously. Instinctive and highly secured, FV350 guides world to a new epoch of improving security with biometrics. Its infrared rays irradiate the vein pattern that is further converted into a biometric template. The fingerprint and vein and templates are further stored in the database for later use and matching.

FV18

FV18 is a multi-biometric reader that can of capture and process finger vein and fingerprint biometric data concurrently. The hardware platform utilizes ZMM220 core-board with 1.2 GHz CPU. With optimization of both algorithm and hardware platform, FV18 provide fast face recognition rate as well as high security terminal. The security terminal provides the flexibility of both standalone installation and setting up with any third-party access control panels that support typical wiegand signal.

RevFace15

RevFace15 describes a Visible Light Facial Recognition installation with mask detection powered by the state-of-the-art ZKTeco’s modified CPU for running the intellectualized engineering algorithm of facial recognition. It is designed to enhance performance in all aspects and cope with all kinds of circumstances. RevFace15 comes with a strong design that works optimally in temperatures of between -20°C (-4°F) and 45°C (113°F). It is also compliant with the IP65 standard in terms of improving environmental durability

SpeedFace-V4L

This hybrid-biometric access control and time and attendance terminal is equipped with visible light facial recognition and palm recognition features is Linux-Based. With the high-tech anti-spoofing algorithm, the attendance terminal is guarded against print attack, videos attack, as well as 3D mask attack. The security level is further improved by multiple methods of verification that include face, palm, card, and password. The following card modules are also available and work perfectly with SpeedFace-V4L:125 kHz ID card, 13.56MHz IC card, HID card, and Felica card. When additional lighting is required, the identification and attendance terminal offers adjustable brightness to supplement the illumination. SpeedFace-V4L is ideal for use in large organizations because it offers up to 800 face and palm templates respectively.

SpeedFace-V5L[QR]

SpeedFace-V5L[QR] is an advanced version of the ZKTeco’s SpeedFace-V5L visible light facial recognition terminal, using smart engineering algorithms of facial recognition and the modern technology of computer vision. It supports a multi-factor system of identity verification by utilizing QR Codes and acquired palm and face data for computational template comparison, analysis, and matching. In addition, the terminal provides huge capacity and quick recognition. SpeedFace-V5L[QR] is driven by the QR Code Scanner that reads barcodes like PDF417, Data Matrix, MicroPDF417, and Aztec, offered DataWorld’s ZKBio Secuity Mobile App for both T&A / A&C. Also, the terminal espouses technology of touch-less recognition and the following supplementary functions: masked individual identification that effectively mitigates hygiene concerns. SpeedFace-V5L[QR] is further equipped with an anti-spoofing algorithm for facial identification against majority of fake photos and videos attack. Outstandingly, the 3-in-1 palm recognition is done in 0.35s per hand and the palm data attained is compared with up to 3,000 palm templates stored in the database.

SpeedFace H5L

Based on Linux, SpeedFace H5L is hybrid biometric access control and time & attendance terminal featuring visible light facial recognition abilities the attendance and access terminal is guarded against all manner of print attack, 3D masks, and video attack through a state-of-the-art Anti-spoofing algorithm. SpeedFace H5L security is further improved by use of multiple verification methods that include password, fingerprint, card, and face coupled with different card modules like 125 kHz ID card (EM) and 13.56MHz IC card. Though the capacity for face and finger templates rates at 6,000, its lighting can be adjusted to increase brightness when need arise. 

SpeedFace M4

SpeedFace M4 is a linux-based multi-biometric access control and time and attendance terminal featuring visible light facial recognition as well as palm recognition capabilities. The terminal is protected from all forms of print, video and 3d attacks by an innovative anti-spoofing algorithm. Additional security is provided by multiple methods of verification including face, password, card, and palm. The following card modules are available: ID, IC, HID, iClass, Felica, Desfire EV1, EV2, and Legic.  SpeedFace M4 further features adjustable brightness to Supplement lighting and a whooping capacity of 6,000 face templates, 3,000 palm templates, 6,000 face templates; 10,000 cards, and 200,000 logs.

SpeedFace-H5L [P]

SpeedFace-H5L [P] is an entirely upgraded version of the SpeedFace-H5L Visible Light Facial Recognition Terminal, using smart engineering facial recognition algorithms and the state-of-the-art technology computer vision. It performs both facial and palm verification with huge capacity and fast recognition with improved security performance in all features. SpeedFace-H5L [P] assumes touchless recognition technology and masked individual identification eradicating hygiene concerns effectively. It is also furnished with decisive anti-spoofing algorithm for facial recognition for protection against fake photos and videos attack. Prominently, the 3-in-1 palm recognition is performed in a fraction of a second the palm data attained is compared with those stored in palm templates.

Notus

Notus is an RFID and Fingerprint access control terminal with an in-built web server. Moreover, Notus serves as a constituent in the system of Video Intercom. The terminal has an HD camera (2MP/1080p) on it, a built-in speaker and microphone, two-way audio, and one-way video communication. When connected to the Wi-Fi, Notus could be linked to ZKTeco’s smart video intercom application ZSmart on a mobile phone. Therefore, it allows remote unlock with password, besides saving video recordings and images captured on ZSmart and ZKBio Access.

Zkteco X8s

X8s is an innovative biometric fingerprint reader for applications of access control, offering unmatched performance through an advanced algorithm with exceptional dependability, meticulousness, and matching speed. It can function on standalone mode with the provision for external electric lock, alarm, door sensor, exit button and doorbell. X8s’s touch keypad operation is user-friendly and convenient when performing tasks like user enrolling, accessing control parameter settings and deleting user.

Zkteco X8-BT

X8-BT is the most advanced biometric fingerprint reader for access control applications, providing unequaled performance using a cutting-edge algorithm with admirable matching speed, reliability, and precision. X8-BT can work as a standalone mode with the interface for external electric lock, exit button, alarm, door sensor, and doorbell. It’s simple and convenient to use and supports mobile phone App management, as well as Bluetooth communication for ease of control access and retrieval of user information registration and devices setting up.

Zkteco X7

X7, one of state-of-the-art biometric fingerprint reader for applications of access control. Providing unmatched performance using an innovative algorithm for outstanding matching speed, reliability, precision. It can function on standalone mode with a provision for third party electric lock, alarm, door sensor, exit button, and doorbell. It has an easy and convenient Keypad operation that is extremely user friendly.

Zkteco TF1700

TF1700 is one of the tiniest Ethernet connection-based fingerprint terminals that is utilized for access control, as well as time attendance features, with IP65 waterproof housing. With its IP65 rated dustproof structure and rugged waterproof, Zkteco TF1700 is durable even in harsh outdoor environmental. It is specifically designed for standalone applications like house, office, shop, garage, and factory. The 2013 version of TF1700 is furnished with a sensor cover that protect the optical reader, and modernized with the latest firmware that supports ZKAccess3.5 management software that has powerful versatile and functions.

Zkteco TF1600

TF1600 is a small IP-based fingerprint terminal for access control and time attendance application. It is particularly designed for working in rough outdoor environment predominantly in conditions of very low temperature. With built-in resistors, Zkteco TF1600 is a small automatically heat by itself when its MCU detects that the temperature has dropped below the working limit. TF1600 is modified to operate in temperatures ranging from -40℃ to 45℃, Entrenched with the modern firmware, TF1600 supports ZKAccess3.5 management software that functions powerfully and has versatile features. Though TF1600 lacks a keypad, users are registered on the device using the Master Card because it is combined with 125 KHz proximity card reader. Enrollment can also be completed by connecting with ZKAccess3.5 software by Ethernet.

Zkteco SF400

SF400 is an IP based fingerprint terminal combining both standalone and network and operation modes. It can be connected with ZKAccess 3.5 software for access control and time attendance management. Featuring Wiegand output, SF400 is flexible to connect with ZK and other 3rd party controllers as a slave reader. Wiegand input configures two SF400 units to use master & slave resolve to enable user verification at the entrance and the exit. Security level is improved and maximized with Anti-pass-back function. Auxiliary input interface permits SF400 to link with an extra source such as an emergency switch or a smoke detector. The moment the linkage function is enabled through the machine menu, SF400 generates an alarm signal that opens doors for fast and easy exit in case of emergency.

Zketco SF300

The SF300 is an IP based fingerprint terminal that function in both network mode and standalone mode. Connects with ZKAccess3.5 software for access control and time attendance management. Wiegand output turns SF300 flexible to connect with ZKTeco or other 3rd party controllers as a slave reader. Furthermore, wiegand input permits two units of SF300 to configure with each other and utilize master and slave solution that necessities user verification at both ingress and exit. For the meantime, anti-pass-back function are used to maximize security.

Zkteco SF100

The SF100 is an IP based fingerprint terminal that perfectly functions both in standalone and network modes. In latter mode, SF100 can connect with ZKAccess3.5 software for management of access control and time attendance. Wiegand output makes SF100 flexible to connect with ZKTeco as well as other 3rd party controllers as a slave reader. Also, wiegand input permits two units of SF100 to configure with one other and employ master and slave solution that necessitates user authentication at both ingress and exit. In the intervening time, security can be boosted to the maximum using the anti-pass-back function.

Zkteco MA500

MA500 is a cutting-edge terminal of biometric access control that suit both standalone operation mode as well as network mode via TCP, IP or RS485 for software management. MA500 is vandal resistant and IP65 rated particularly due to the metal housing and a backlit keypad that is bound to last for a lifetime. These features make MA500 suitable for installation in places with very high traffic and harsh environmental conditions. On top of linking with electric lock, door sensor, alarm and exit button, MA500 can also function as a wiegand fingerprint reader through any 3rd party control panels in the network mode. By use of biometric technology, MA500 gains the status of value addition, making it very easy to replace both the conventional proximity and keypad access control system.

Zkteco MA300-BT

MA300-BT, one of the most advanced biometric fingerprint readers for access control applications. Offering unrivalled performances by espousing an innovative ZK fingerprint algorithm for steadfastness, meticulousness and exceptional matching speed. MA300-BT has a metallic casing and IP65 rated. This enables the access safe from dust and water damage among other environmental weather elements.

Zkteco MA300

Similar to MA300-BT, MA300 describes an equally advanced biometric fingerprint readers for access control applications. Offering unrivalled performances by espousing an innovative ZK fingerprint algorithm for steadfastness, meticulousness and exceptional matching speed. MA300-BT has a metallic casing and IP65 rated. This enables the access safe from dust and water damage among other environmental weather elements.

Zkteco F22

F22 is an ultra-slim fingerprint time attendance and access control terminal with Wi-Fi and BioID sensor that provides unrivalled performance with unconventional algorithm for steadfastness, exactness and brilliant matching speed. As a matter of facts, Zkteco F22 is the fastest fingerprint matching algorithm for commercial utilization and ZKTeco high image quality infrared detection fingerprint sensor that performs at world class level.

Zkteco F21

F21 is an outstanding attendance and access control terminal featuring the most innovative SilkID technology. This attendance and access control terminal is ideal for installation in places where users are likely to have wet, dry or rough fingers in most cases because it possesses exceptionally high identification in the named conditions. Matters security, F21 provides the highest security by its live finger detecting ability. F21 has an optional provision for photo taking function that allows attendance photo and Photo ID, which is ideal for improving security in public business premises.

Zkteco F18

F18 is an advanced biometric finger print reader for access control utilization. Zkteco F18 is ZKTeco’s most popular devices because of compact design and high-performance application. The security access terminal is fitted with ZKTeco’s modern firmware with an UI that is user-friendly, as well as user privilege settings that are flexible for multi-level management. The innovative hardware platform utilizes ZMM210 core-board with 1.2 GHz CPU. Both hardware platform and firmware are optimized, allowing the new f18 manage to verify fingerprints with higher accuracy, fast and efficiently. F18 either operates as standalone installation, as well as with other third-party access control panels that are compatible with standard Wiegand signal. With available TCP, IP and RS485 F18 can be applied in deferent network settings, giving it a sense of universal applicability.

Zkteco F16

F16 is an advanced fingerprint access control terminal featuring an integrated proximity reader. Being IP65 rated F16 water and dust resistant, and it can withstand other forms damage causing weather elements. The access terminal has both Ethernet and RS485 serial ports, making installation on user network absolutely easy Weigand-OUT port permits linking of reader to ZK and other third-party access control panels. By means of Weigand-In port, the user can link to any card readers for validation at both ingress point and exit point.

SC700

SC700 describes a 125 KHz proximity access control terminal amalgamated with 2.8’ ‘TFT LCD. For easy menu management, the access control panel offers color display and touch screen operation, which is equally user-friendly. Once linked with PC through Ethernet, SC700 is controlled by ZKAccess 3.5 software. The software offers 2 applications namely: access control and time attendance and the two can run at the same time. It can similarly operate on standalone mode, as well as transfer data via USB flash drive.

SC405

SC405 describes a RFID Access Control Terminal that has a 2.0-inch color display with graphical UI. These features enable easy control because their user-friendliness is world-class. DataWorld’s SC405 has a built-in auxiliary input function that augments the flexibility, allowing the terminal to be linked with wired detector and emergency switch. Absolute security levels are guaranteed through the application of multi-verification methods that combine PIN, password and card. Likewise, SC405 is compatible and works perfectly with USB flash drive that facilitate offline data management.  SC405 is further equipped with numerous alarm outputs like tamper duress alarm and proof switch. The convenience and adaptability of this access control terminal make it ideal residential housing installation, offices, and public facilities.

SC105

Is identically similar to SC405 because it also features a RFID Access Control Terminal that has a 2.0-inch color display with graphical UI. These features enable easy control because their user-friendliness is world-class. DataWorld’s SC405 has a built-in auxiliary input function that augments the flexibility, allowing the terminal to be linked with wired detector and emergency switch. Absolute security levels are guaranteed through the application of multi-verification methods that combine PIN, password and card. Likewise, SC405 is compatible and works perfectly with USB flash drive that facilitate offline data management.  SC405 is further equipped with numerous alarm outputs like tamper duress alarm and proof switch. The convenience and adaptability of this access control terminal make it ideal residential housing installation, offices, and public facilities.

SKW-V & SKW-H

SKW-V and SKW-H are standalone access control devices that are waterproof with an IP65 metal case and a keypad. The device supports authentication with RFID cards and passwords. SKW-V and SKW-H can either be utilized as readers linking with a as A&C standalone devices and control panel.

SA40

SA40 is a conventional A&C standalone device that supports RFID authentication and password for access control. SA40 requires three different verification modes that greatly enhances its security level. Deleting or adding users in the device is accomplished with through simple steps, making the access terminal very convenient for customer.

MKW-H

MKW-H is a flexible standalone access control devices with an IP65 metal case that make it dust and waterproof and a keypad from ZKTeco Company. MKW-H supports verification with RFID cards and passwords. The access control terminal can either be installed as A&C standalone devices or readers linking with a control panel.

MKW-V

Similar and identical to MKW-H, MKW-V describes flexible standalone access control devices with an IP65 metal case that make it dust and waterproof and a keypad from ZKTeco Company. MKW-H supports verification with RFID cards and passwords. The access control terminal can either be installed as A&C standalone devices or readers linking with a control panel. The only difference is in the design of the metal casing with MKW-H having a square shaped casing and MKW-V having a rectangular casing. Preferring one to the other is simply a matter of taste and preference.

KSh 1,500,000.00 Excl. VAT
KSh 400,000.00 Excl. VAT
KSh 180,000.00 Excl. VAT
KSh 180,000.00 Excl. VAT
KSh 38,000.00 Excl. VAT
KSh 32,000.00 Excl. VAT
KSh 30,000.00 Excl. VAT
KSh 22,000.00 Excl. VAT
KSh 21,000.00 Excl. VAT
KSh 17,000.00 Excl. VAT
KSh 15,000.00 Excl. VAT
KSh 13,500.00 Excl. VAT
KSh 11,500.00 Excl. VAT
KSh 10,000.00 Excl. VAT
KSh 7,500.00 Excl. VAT
KSh 5,000.00 Excl. VAT
KSh 4,500.00 Excl. VAT