APC Back-UPS 1200VA, 230V, AVR, Universal Sockets BX1200MI

The APC Back-UPS 1200VA Tower is a reliable and versatile uninterruptible power supply (UPS) designed to provide essential backup power and surge protection for electronic devices, computers, and networking equipment. With an output capacity of 650 Watts / 1.2kVA, it ensures the continuous operation of connected devices during power interruptions, voltage fluctuations, and surges. The unit features Automatic Voltage Regulation (AVR) to stabilize incoming voltage levels, extending the lifespan of your equipment and ensuring optimal performance.

The APC Back-UPS 1200VA comes equipped with six IEC 60320 C13 outlets, offering battery backup and surge protection for critical devices, while allowing you to protect less critical devices through surge-only outlets. The compact tower design makes it an ideal choice for both home and office setups, providing clean and reliable power management in a space-efficient form factor.

Key Features:

• Power Capacity: 650 Watts / 1.2kVA
• Output Voltage Regulation: 230V Nominal (Adjustable 140V to 300V)
• Output Connections: 6x IEC 60320 C13 (Battery Backup)
• Input Voltage: 230V Nominal
• Input Connections: IEC 60320 C14 (1.2-meter power cord)
• Waveform Type: Stepped approximation to a sine wave
• Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to safe levels without using battery power.
• Data Line Surge Protection: Protects connected devices from power surges along data lines.
• USB Connectivity: Enables easy access to power management features via your PC.
• Intelligent Battery Management: Enhances battery performance, reliability, and life through precision charging.
• Audible Alarms & LED Indicators: Provides real-time UPS and power condition notifications.

Technical Specifications:

Output:

• Max Configurable Power: 650 Watts / 1.2kVA
• Output Frequency (Sync to Mains): 50/60 Hz +/- 1 Hz
• Topology: Line Interactive
• Waveform Type: Stepped approximation to a sine wave
• Transfer Time: 6 ms typical; 10 ms maximum

Input:

• Input Frequency: 50/60 Hz +/- 5 Hz (Auto-sensing)
• Input Voltage Range for Main Operations: 140V – 300V
• Input Power Factor at Full Load: 0.54
• Number of Power Cords: 1 (1.2 meters length)

Battery and Runtime:

• Battery Type: Lead-acid Battery
• Typical Recharge Time: 8 hours
• Nominal Battery Voltage: 12 V
• Replacement Battery: APCRBC175
• Expected Battery Life: 3 – 5 years
• Battery Volt-Amp-Hour Capacity: 108 VAh

Surge Protection and Filtering:

• Surge Energy Rating: 273 Joules
• Protection Class: IP20

Communications & Management:

• Interface Port(s): USB
• Control Panel: LED Status Display with On-line and On-battery Indicators

Physical Dimensions:

• Maximum Height: 190 mm (19.0 cm)
• Maximum Width: 140 mm (14.0 cm)
• Maximum Depth: 390 mm (39.0 cm)
• Net Weight: 7.6 kg
• Shipping Weight: 8.6 kg
• Shipping Dimensions: (H x W x D) 297 mm x 495 mm x 235 mm

Environmental Specifications:

• Operating Temperature: 0°C to 40°C
• Operating Relative Humidity: 0 to 95% (Non-condensing)
• Operating Elevation: 0 to 3000 meters
• Storage Temperature: -15°C to 40°C
• Storage Relative Humidity: 0 to 95% (Non-condensing)
• Storage Elevation: 0 to 3000 meters
• Audible Noise at 1 Meter: 40.0 dBA

Certifications & Compliance:

• Approvals: CE, CB, EAC
• RoHS Compliance: Yes

Additional Features:

• Automatic Self-Test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery Failure Notification: Provides early-warning fault analysis, enabling proactive maintenance.
• Safety-Agency Approved: Ensures the product has been tested and approved to work safely in specified environments.

The APC Back-UPS 1200VA Tower is the perfect solution for keeping your electronics and essential devices powered, protected, and connected during power disturbances.

Also Check